首页 ꄲ 液晶 ꄲ 字符点阵TBG016002D

字符点阵TBG016002D

16x2字符点阵

ꄲ下一个：字符点阵液晶TBG016002C

MODULE DESCRIPTION

·Control LSI is KS0066.

·Only 1.25mA Typical Input Current.

·0.66mm×0.56mm dot size.

·Jarless, Easy used, Good compatible.

·Typical Operation Voltage 3v-5v.

·Wide Operation Temperature From-40℃ To 70℃.

·STN positive display(green/yellow) and negative display(white/blue) are available.

·Contrast- AUTO-Electrical- Compensate Against Temprature is available freely .

Ordering Information

Model

Display model

Functional Definition

TBC016002D00

5V, STN Yellow-green

Base display function with LED. Operation Temperature From-20℃ To 70℃

TBC016002D10

3V-5V,STN Yellow-green

Contrast- AUTO-Electrical- Compensate Against Temprature

Wide Operation Temperature From-40℃ To 70℃

PHYSICAL DATA

Item	Contents	Unit
LCD type	STN	---
LCD duty	1/16	---
LCD bias	1/5	---
Viewing direction	6	o’clock
Module size (W×H×T)	85 × 29.5 ×13.5MAX	mm
Viewing area (W×H)	64.5 × 16.4	mm
Number of characters (characters ×lines)	16 × 2	---
Character matrix (W×H)	5 × 8	dots
Character size (W×H)	5.56 × 2.96	mm
Character pitch (W×H)	5.94×3.55	mm
Dot size (W×H)	0.66 ×0.56	mm
Dot pitch (W×H)	0.70x0.60	mm

EXTERNAL DIMENSIONS

BLOCK DIAGRAM

INTERFACE PIN CONNECTIONS

PIN	SYMBOL	SIGNAL DESCRIPTION
1	VDD	Logic voltage supply(+5.0V)
2	VSS	Ground(0V)
3	V0	LCD driver voltage input
4	RS	Data/Instruction register select
5	R/W	Read/Write select
6	E	Enable signal
7~14	DB0~DB7	Data bus line
	A	LED backlight anode
	K	LED backlight cathode
*LCD can be driven by pin1, pin2,or A and K

ABSOLUTE MAXIMUM RATINGS ( Ta = 25°C )

PARAMETER	SYMBOL	MIN	MAX	Unit
Supply voltage for logic	VDD	-0.3	7.0	V
Supply voltage for LCD	VDD- VO	-0.3	13.5	V
Input voltage	VI	-0.3	VDD+0.3	V
Operating temperature	TOP	-20	70	°C
Storage temperature	TST	-30	80	°C

ELECTRICAL CHARACTERRISTICS (VDD = +5V±10% , VSS = 0V, Ta = 25°C )

Electro-Optic Characteristics (module unit):

ITEM	SYMBOL	MIN	TYP	MAX	Unit	CONDITION
Input high voltage	V_IH		-	VDD	V
Input low voltage	V_IL	-0.3	-	0.6	V
Output high voltage	V_OH	2.4	-	VDD	V
Output low voltage	V_OL	-	-	0.4 V
Frame frequency	F_f	-	84.33	-	HZ	FOSC=270 KHZ
Oscillation frequency	F_OSC	-	270	-	KHZ	VDD=5V Rf=91kΩ±2%

Typical Electro-Optic Characteristics

No.	ITEM		SYMBOL	MIN	TYP	MAX	Unit	CONDITION
1	Supply voltage(Logic)		VDD-VSS	3.0	5.0	5.5	V
2	Supply current (Logic)		IDD		1.25		mA	VDD=5V
3	LCD operating voltage		VDD-V0		4.7		V	0℃
				4.2	4.4	4.7	V	25℃
					4.2		V	50℃
4	Response time		Ton		176		ms
4	Response time		Toff		77		ms
5	Contrast		CR	3
6	Viewing angel	12H	Θ1		45		Deg.	(CR≥3.0)
		6H	Θ2		45
		3H	Θ3		60
		9H	Θ4		60

RELIABILITY TEST

ITEM	SYMBOL	MIN	TYP	MAX	Unit	CONDITION
Forward Voltage	VF	4.0	4.2	4.4	V	IF=110mA
Reverse Voltage	VR		5		V
Reverse Current	IR			100	µA	VR=4V
Power Dissipation	PD		75×22		mW
Luminous Intensity	LV	115	140		cd/m²	IF=110mA
Emission Wavelength	Λ P	569	572	575	nm	IF=110mA Ta=25℃
Spectral Range	Δ Λ		25		nm	IF=110mA Ta=25℃

TIMING CHARACTERISTICS (VDD=4.5 to 5.5V)

Write operation and Read operation

ITEM	SYMBOL	MIN	TYP	MAX	Unit
Enable Cycle Time	T_CYCLE	400	-	--	nS
Enable Pulse Width	P_WEH	150	-	--	nS
Enable Rise & Fall Time	T_ER,T_EF	--	-	25	nS
Address Set-Up Time	T_AS	30	-	--	nS
Address Hold Time	T_AH	10	-	--	nS
Data Set-Up Time	T_DSW	40	-	--	nS
Data Hold Time	T_H	10	-	--	nS

ITEM	SYMBOL	MIN	TYP	MAX	Unit
Enable Cycle Time	T_CYCLE	400	--	--	nS
- Enable Pulse Width	P_WEH	150	--	--	nS
Enable Rise& Fall Time	T_ER,T_EF	-	--	25	nS
Address Set-Up Time	T_AS	30	--	--	nS
Address Hold Time	T_AH	10	--	--	nS
Data Output Delay Time	T_DSW	-	--	100	nS
Data Hold Time	T_H	20	--	--	nS

Write Operation:

Read Operation

For more instruction information refer to KS0066 data-sheet.

字符点阵TBG016002D

EXTERNAL DIMENSIONS

VDD

VDD- VO

Address Set-Up Time